www.sunled.com part number: LBBA12W t-1 3/4 (5mm) solid state lamp published date : mar 26, 2008 drawing no : sdsa4800 v4 checked : b.l.liu p.1/4 part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LBBA12W blue ingan water clear 280 995 468 16 zabsolute maximum ratings (t a =25c ) bba (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 1000 v lead solder temperature [2mm below package base] 260c for 3 seconds lead solder temperature [5mm below package base] 260c for 5 seconds electrostatic diacharge threshold (hbm) bba (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.2 v forward voltage (max.) (i f =20ma) v f 4.0 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 468 nm wavelength of domi- nant emission (typ.) (i f =20ma) d 470 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 21 nm capacitance (typ.) (v f =0v, f=1mhz) c 100 pf operating characteristics (t a =25c ) attention observe precautions for handling electrostatic discharge sensitive devices preliminary spec features z low power consumption. z popular t-1 3/4 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. z rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3.specifications are subject to change without notice.
www.sunled.com part number: LBBA12W t-1 3/4 (5mm) solid state lamp published date : mar 26, 2008 drawing no : sdsa4800 v4 checked : b.l.liu p.2/4 ? bba
www.sunled.com part number: LBBA12W t-1 3/4 (5mm) solid state lamp published date : mar 26, 2008 drawing no : sdsa4800 v4 checked : b.l.liu p.3/4 remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
www.sunled.com part number: LBBA12W t-1 3/4 (5mm) solid state lamp published date : mar 26, 2008 drawing no : sdsa4800 v4 checked : b.l.liu p.4/4 packing & label specifications LBBA12W
|
